Magic Plus Magnet Plus 20W50
Magic Plus Magnet Plus 20W50 is a superior quality engine oil of API CD-SF quality level, formulated from solvent refined paraffin base stocks and carefully selected detergent / dispersant, incorporated with anti-wear pour point, and antifoam additives, with a reduced ash content, to provide good all-around performance.
Magic Plus Magnet Plus 20W50 is a superior quality engine oil of API CD-SF quality level, formulated from solvent refined paraffin base stocks and carefully selected detergent / dispersant, incorporated with anti-wear pour point, and antifoam additives, with a reduced ash content, to provide good all-around performance. It has a high resistance to oxidation. It has high standard performance to protect and lubricate under the most severe operating conditions.
Magic Plus Magnet Plus 20W50 is suitable for use in heavily loaded turbo charged diesel and gasoline engines; operated in off-highway and on-road equipment. They are extensively used in transport, earth moving/quarrying and construction equipment’s as well as stationery diesel equipment’s. It meets and exceeds the requirements of API engine service classification of CD-SF, and CCMD D2 and are formulated to meet the requirements of MIL-L-2104D, and MIL-L-45199 B specification. They also meet the requirements for Caterpillar TO-2 and Detroit Diesel Allison C-3 transmission oils.
BENEFITS
Minimizes deposits and keeps engine clean resulting less wear.
Provides reserve alkalinity and excellent oxidation stability to extend oil drain intervals.
Excellent low temperature sludge and corrosion protection.
Prevention against rust.
Can be used in both gasoline and diesel engines: normally aspirated or turbo charged.
Low operational cost.
Resistance to oxidation.
Extended oil drain interval.
Applicable in wide range of equipment’s.
Typical Properties
Particulars |
ASTM |
Result |
SAE Grade |
20W50 |
|
Viscosity,cSt @ 40ºC |
ASTM D 445 |
152 |
Viscosity,cSt @ 100ºC |
ASTM D 445 |
17 |
Viscosity Index |
ASTM D 2270 |
120 |
Flash Point, ºC, |
ASTM D 92 |
225 |
Pour Point, ºC, |
ASTM D 97 |
-20 |
TBN mg KOH/g, |
ASTM D 2896 |
11 |
Sulfated Ash, wt%, |
ASTM D 874 |
<1% |